Our latest two head machine that can fill bottles or cans OR BOTH on the same machine with a smaller footprint AND lower cost.
Features: 2 – Auto-height compensating fill valves, 2 – Auto-height compensating capping positions, Pre-Purge, counter pressure filling, switches easily from bottling to canning, multiple bottle closing options for crown caps and cans, and versatile for multiple bottle and can sizes
Accessories & Options: Dkanner® Module, MicroBottler® Module, Crown Capping, and Lid Presenter
This is huge! Well actually it is little. Micro. Mini Micro. Our smallest most affordable machine yet: The Mini Microbottler.
About the Machine
All machines are modular in design and can be configured to your needs and run on a low current, 120/240 VAC, 50/60Hz power supply.
The All-in-One Machine includes modules for bottling and canning on one machine. This machine comes with the roll around stand, Bottle Crown Capper, Pre-Purge, Can Seamer, three totes for bottles and four totes for cans. It uses compressed air or CO2 slide movement.
Includes: 4 Standard Counterpressure fill valves, Crown Capper, Seamer V2.0 with tooling for Crown Can 202 Opening, 202 Lids, Prepurge, Bottle and Can Fill Adapters, Lid Guide, Compressed Air/CO2 Powered, Wheeled Base, Spare parts kit, 3 Bottle Totes, 3 Can Totes.
About the Machine
All machines are modular in design and can be configured to your needs and run on a low current, 120/240 VAC, 50/60Hz power supply. The MicroBottler is a four-head counter-pressure filler. It uses a tote system to move four bottles through machine at once. It can fill and close up to 10, 12oz (355ml) bottles per minute. The base machine comes with Air or CO2 for slide movement and CO2 for bottle purge. The machine is mounted on a roll around stand with locking wheels. The MicroBottler is also available as a gravity, or pump feed machine.
Includes: 4 Standard Counterpressure fill valves, Compressed air option, Spare parts kit, 2 bottle totes. Options include: Bottle Wash Systems and the MicroRinse Exit side Rinser and Air Blast.
In-line Bottle Closers Modules: Bottle closers in various styles can be mounted on the machine in line with the fill section. Crown Caps (pry off or twist off), Twist off/on Safety Cap single hand pneumatic closer, and the Four Position Twist off/on Safety Cap Automatic pneumatic closer. Corking is also available.
About the Machine
All machines are modular in design and can be configured to your needs and run on a low current, 120/240 VAC, 50/60Hz power supply.
The DKanner is a four head counter-pressure filler with V2.0 Seamer that can accommodate most can and lid sizes with the swap out of tooling. It uses tote system to move four cans through machine. It can fill and seam up to 10, 12oz (355ml) cans per minute. The base machine comes with Air or CO2 for slide movement and CO2 for can purge. The machine is mounted on a roll around stand with locking wheels.
Includes pre-purge, lid guide, 2 can totes, Can adapters, tray, wheeled base and spare parts kit with tooling for 1 can size, any additional can sizes would require new tooling at additional cost. Options include: can washer, lid presenter and MicroRinse Exit side Rinser and Air Blast.
Our Gravity Fill Benchtop machine can bottle non-carbonated beverages and syrups from 1 ounce to 1 gallon in volume.
The Gravity Filler features 4 Auto-height compensating fill valves and 3 Bottle totes (your choice of bottle size). Capping options are: Crown pry-off and twist off caps – Wine and Belgian corks, T-corks, and Plastic and metal twist/spin caps. Rated up to 200 degrees Fahrenheit.
Industries served
Beer
Cider
Coffee
Kombucha
Soda
Wine
Using our machines already? Adding hand sanitizers and disinfectants to your distillery line-up? We have modified our Gravity Filler to add options for smaller-mouth bottles commonly used for travel-size hand sanitizers.
Please reach out to us so we can help you help your customers at this time! (Including those 2 oz options for on-the-go sanitation.)